BGNGJ - SAND MIL-C-46168C (COMPONENT A)
- MSDS: BGNGJ
- Manufacturer: ENTERPRISE CHEM COATINGS CO
- Product Name: SAND MIL-C-46168C (COMPONENT A)
- National Stock Number: 8010-01-131-6259
Product Identification
Product ID:SAND MIL-C-46168C (COMPONENT A)
MSDS Date:01/01/1987
FSC:8010
NIIN:01-131-6259
Kit Part:Y
MSDS Number: BGNGJ
Responsible Party
CHICAGO, IL 60608-5322
US
Cage: KO114
Contractor
Cage: 60035
Ingredients
PROPYLENE GLYCOL METHYL ETHER ACETATE
Fraction By Weight: 19.0%
METHYL ETHYL KETONE (2-BUTANONE) (MEK) (SARA III)
CAS: 78-93-3
RTECS: EL6475000
Fraction By Weight: 16.5%
OSHA PEL 200 PPM
ACGIH TLV: 200 PPM/300STEL;9394
EPA Report Quantity: 5000 LBS
DOT Report Quantity: 5000 LBS
N-BUTYL ACETATE (SARA III)
CAS: 123-86-4
RTECS: AF7350000
Fraction By Weight: 5.4%
OSHA PEL 150 PPM
ACGIH TLV: 150 PPM/200STEL;9394
EPA Report Quantity: 5000 LBS
DOT Report Quantity: 5000 LBS
DIACETONE ALCOHOL
RTECS: HI5600000
Fraction By Weight: 0.1%
ACGIH TLV: 50PPM
Hazards
Effects of Overexposure:IRRIT OF RESPIRAT TRACT/ACUTE NERV SYS
DEPRESSN,HDACH,DIZZ,STAGG GAIT,CONFUS,UNCONSCIOUSNES OR COMA.
First Aid
First Aid:VAPORS:REMOV FROM EXPOSURE. RESTORE BREATHING. KEEP WARM &
QUIET. NOTIFY A PHYSICIAN. SPLASH SKIN. WASH W/SOAP & WATER.
Fire Fighting
Flash Point:26F -3C
Lower Limits:1.7
Extinguishing Media:ANY CL B FIRE EXTINGUISHER
Fire Fighting Procedures:SELF-CONTND BREATH APPARAT.FULL PROTECTV
EQPMT.FOG NOZZ-PREF
Unusual Fire/Explosion Hazard:KP CONTNRS TIGHTLY CLOS.ISOLAT FR
HEAT,ELECT EQPMT,SPARKS & OPN FLAM.CLOS CONTNRS MAY EXPLOD(SUP)
Accidental Release
Spill Release Procedures:REMOVE ALL SOURCES OF IGNITION.AVOID BREATHING
VAPORS. VENTILATE AREA, CONTN & REMOVE W/INERT ABSORBENT &
NONSPARKING TOOLS.
Handling
Handling and Storage Precautions:STORE LG QUANTITIES IN BLDGS.DESIGNED
& PROTECTED F/STORAGE COMPLIANCE W/OSHA 1910.106.
Other Precautions:DO NOT TAKE INTERNALLY. CONTNR SHOULD BE GROUND WHEN
POURING. EMPTY DRUM MAY CONTN HAZARDOUS RESIDUE. KP AWAY FR
HEAT,SPARKS & FLAME.DO NOT CUT, PUNCTURE OR WELD ON OR NEAR
CONTAINER.
Exposure Controls
Ventilation:ADEQUATE TO KP BELOW TLV. VENT FUMES EMITTED ON HEATING.
Protective Gloves:NONE REQD
Eye Protection:REQUIRED
Other Protective Equipment:RUBBER GLOVES FOR REPEATED EXPOSURE.
Supplemental Safety and Health
Chemical Properties
HCC:F2
Boiling Pt:B.P. Text:174-338F
Vapor Density:HEAV
Evaporation Rate & Reference:FASTER
Stability
Stability Indicator/Materials to Avoid:YES
WATER GREASE
Stability Condition to Avoid:HEAT, SPARKS, OPEN FLAME.
Conditions to Avoid Polymerization:ELEVATED TEMPERATURES
Disposal
Waste Disposal Methods:DISPOSE IN ACCORDANCE W/LOCAL,STATE & FEDERAL
REGULATIONS. INCINERATE IN APPRVD FACILITY.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.